How To Carry Out A Home Inspection Greensboro Project

By Michelle Thompson


The interior appearance of a building can easily sway you into purchasing a home that is full of defects. Do not concentrate on the kitchen layout and size of the bathroom and forget to check the building itself. The architectural design of a new home should meet your preference and lifestyle. The ideal tactic for buying a perfect house is conducting an intensive home inspection Greensboro Process. It is easy and cost effective to repair defects that are identified at an early stage.

Walls backing onto either the kitchen or bathroom should be free from stains or corrosions. Availability of traces of moisture verifies the presence minor cracks. The intensity of corrosion is directly proportional to the size of cracks. While presence of corrosion does not fall into the category of structural defects, repairing them is not only expensive but also time consuming. Make sure you have identified defects that may result in costly repair in the future. Thoroughly inspect the kitchen walls, sinks, and drainage system.

Never purchase houses, which have ceilings that have a parachute shape. The ceilings must be stable and fit perfectly into the walls. When a torch is shined across the ceiling, deflections and other defects are identified. Put into writing all the defects identified and seek assistance from a reliable inspector during the process of preparing an inspection report. The report should list down all defects, recommendations for dealing with them, as well as their repair cost. The inspection report gives you the bargaining power.

Make sure all the cabinets available in the building are in a perfect state. Cabinets that contain buildups of molds or mildews have a tendency of releasing damp smells. Spores produced by these funguses can trigger allergic reactions in the body of occupants of the building. You should wear gloves and facemasks during the process of inspecting the cabinets. Excessive moisture and rising damps are confirmed by the damp smells that emanates from the cabinets. Look for large cracks on the outer and inner walls.

Molds and mildews have a high growth rate especially in bedrooms, kitchens, and bathrooms. In case you notice dirty clouds on floors, ceilings, or walls, you should know that the building has a history of dealing with molds. If you decide to purchase such a house, you must plan to contract a mold remediation firm in future.

Thoroughly inspect the interior walls and make sure they are free from fine cracks. Since fine cracks have a map-shaped appearance and accumulate on specific areas, you can easily identify them. These cracks deserve to be repaired immediately they are identified because cracking does not stop until the wall gets loose.

The external rooflines should be straight and without any deflections or defects. Carry out a thorough inspection of the roof gutters and confirm if they are not stained particularly on their inner edges. Although the roof gutters might have a nice appearance from ground level, they might appear stained from the top side.

All the roof downpipes should discharge water into the soak wells. Look for signs of excessive water flow or flooding. These signs are usually detected on the roof downpipe bases. Prior to signing the purchase documents ensure the stormwater wells are perfectly installed and maintained.




About the Author: